Benelli M4 Optic Mount – Aimpoint® Micro T2

Rx Arms Solutions Benelli M4 Optic Mount for the Aimpoint® T2.  Made from 7075 Aluminum and Mil Spec Type III Hard Coat annodized. This Benelli M4 optic mount gives users the ability to directly mount a T2 optic directly to the top of the Benelli M4 receiver.  Providing lower 1/3 co witness with the OEM Benelli M4 sights.  In addition, it provides compatibility with the Rx Arms Solutions Benelli M4 Handguard Compatible M-LOK® Heat Shield via the boss hole at the front of the optic mount.  Made In Canada.

Co-Witness with Benelli M4 Sights

The Rx Arms Benelli M4 Optic Mount for the Aimpoint® T2 is mounted at the ideal height to give co-witness ability using the factory OEM sights.  Lower 1/3 co-witness is achieved when sighting in the shotgun for both close range, and longer distances.  When paired up with Rx Arms Benelli M4 Half Moon Rear Sight the usability of the red dot improves even more, opening up the sight picture for quicker target acquisition while retaining the ability of backup sights if needed.

Benelli M4 Optic Mount – Aimpoint® Micro T2 Specs:

• Rx Arms Benelli M4 Optic Mount for the Aimpoint® Micro T2 is specifically designed and tested for compatibility with the Benelli M4 and M1014.
• Material:  7075-T6 Aluminum
• Mil Spec Type III hard coat annodized.
• Weight: 26g
• Provides Co-Witness with OEM Benelli M4 Sights lower 1/3.
• Adequate clearance for flip up lense caps.
• Compatibility with the Rx Arms Solutions Benelli M4 Handguard Compatible M-LOK® Heat Shield.
• Includes: a set of M3 optic mounting screws for the Aimpoint® T2, Torx 10 bit required (not included).
• Uses original Benelli M4 OEM receiver screws and washers for mounting to receiver, or upgrade to the Rx Arms Benelli M4 Mounting Rail Screws.
• Lifetime warranty against manufacturer defects, like all of our Benelli M4 accessories and parts.
• Made in Canada.
• Refund and Returns policy can be viewed here.

Installation Instructions:

1. You must install the Aimpoint MICRO (T1 and T2) unit before you mount the Rx Arms optic mount onto the receiver.
2. Torque for the provided M3 screws is MAX 10inlb when fastening the MICRO unit to the Rx Arms mount.  Do NOT use loctite as per Aimpoint instructions.  Utilizes a T10 torx bit (not included)
3. After installing MICRO onto the Rx Arms optic mount, it is now time to install the optic mount onto the receiver.
4. Attach the Rx Arms optic mount to the receiver using the OEM screws and washers from the OEM picatinny rail, snugging up the receiver screws in order from front to back.  If your MICRO unit has lense caps on it, the rear lense cap needs to be removed for this step to access the screw properly.
5. Do a final tightening of the receiver screws to 15inlb dry, if using loctite, we suggest no more than 12-13inlb.

USA Residents Info:

We ship this domestically from our USA location, no duties, no tariffs.

• Please see our FAQ for more information.

Other International Shipments (IMPORTANT):

• Other International customers are responsible for any customs tax/duties.  This is not legal advice, do your own research and due diligence.
• International customers are solely responsible to comply with all of their local laws and regulations.  Rx Arms Solutions is not liable for any legal compliance issues that may arise from the purchase of my products.
• For Customs, this part will be labeled as “Sporting Shotgun Accessories”: HST Code: 9305.20.00
• International Shipping: Items will be shipped with tracking.
• Once shipped, this item is non refundable, if it gets lost in the mail, it is the customers responsibility and cost.  Rx Arms Solutions is not liable for any lost shipments.

Backorder/Preorder Terms:

• • Backorders are payment in full.  If, for whatever reason, you need to cancel the backorder before it ships, I will need to take 5% off the total backorder amount to refund the amount.  This will cover charges my credit card processor charges me.  For example, if the order was for $100, I will keep $5 and return $95 to you, to cover my back end costs.
  • When ordering a backorder item with an item in stock, the shipment will be delayed until all items are in stock.

You may be interested in some of my other Benelli M4 and Tavor x95 / 7 Parts. Get more information on the Benelli M4.  Benelli® is a registered trademark of Benelli Armi SpA. Rx Arms Solutions Ltd. is not affiliated with or endorsed by Benelli or its subsidiaries.