Benelli M4 Optic Mount – Trijicon® RMR

Rx Arms Solutions Benelli M4 Optic Mount for the Trijicon® RMR footprint. Made from 7075 Aluminum and Mil Spec Type III Hard Coat annodized. This Benelli M4 optic mount gives users the ability to directly mount an RMR optic directly to the top of the Benelli M4 receiver.  Providing lower 1/3 co witness with the OEM Benelli M4 sights.  In addition, it provides compatibility with the Rx Arms Solutions Benelli M4 M-LOK® Heat Shield via the boss hole at the front of the optic mount.  Made In Canada.

It should be noted, the RMR screws that are provided with this optic mount are specifically for the Trijicon® RMR.  Careful consideration should be taken when using other optics with the RMR footprint as the provided screws may be too long and could damage the Benelli M4 Receiver.

Co-Witness with Benelli M4 Sights

The Rx Arms Benelli M4 Optic Mount for the Trijicon® RMR is mounted at the ideal height to give co-witness ability using the factory OEM sights.  Lower 1/3 co-witness is achieved when sighting in the shotgun for both close range, and longer distances.  When paired up with Rx Arms Benelli M4 Half Moon Rear Sight the usability of the red dot improves even more, opening up the sight picture for quicker target acquisition while retaining the ability of backup sights if needed.

Benelli M4 Optic Mount – RMR Specs:

• Rx Arms Benelli M4 Optic Mount for the RMR is specifically designed and tested for the Benelli M4 and M1014.
• Material:  7075-T6 Aluminum, vastly superior to 6061 in Tensile Strength, Yield Strength, Shear Strength and Hardness.
• Mil Spec Type III hard coat annodized.
• Weight: 25g
• Provides Co-Witness with OEM Benelli M4 Sights.
• Compatibility with the Rx Arms Solutions Benelli M4 M-LOK® Heatshield.
• Includes: a set of optic mounting screws for the Trijicon® RMR
• Uses original Benelli M4 OEM receiver screws and washers for mounting to receiver.
• Lifetime warranty against manufacturer defects, like all of our Benelli M4 accessories and parts.
• Made in Canada.
• Refund and Returns policy can be viewed here.

USA Residents Customs Info:

We have been shipping our products to USA customers for years without issue, below are some items to note:

• USA customers are responsible for any customs tax/duties, however anything under $800 USD is rarely taxed according to the research I have conducted. This is not legal advice, do your own research and due diligence.
• According to the ATF, a Form 6 exemption is granted for sporting shotgun parts/accessories as stated on point 6. “Sporting shotgun parts other than firearm frames or receivers or barrels.” [are exempt from Form 6].   The Benelli M4 is a shotgun that is legally imported into the USA as “generally recognized as particularly suitable for or readily adaptable to sporting purposes.” (further details on this can be read in the ATF National Firearms Act Handbook).  As such, it is a sporting shotgun when it is imported into the USA, and according to the Form 6 exemption list, does not need a form 6 when importing parts and accessories..  This is not legal advice, please do your own research and due diligence.
• For Customs, this part will be labeled as “Sport Shotgun Accessory” HST Code 9305.20.80 (Found in Chapter 93).
• USA Shipping: This item will be shipped with tracking.

Other International Shipments (IMPORTANT):

• Other International customers are responsible for any customs tax/duties.  This is not legal advice, do your own research and due diligence.
• International customers are solely responsible to comply with all of their local laws and regulations.  Rx Arms Solutions is not liable for any legal compliance issues that may arise from the purchase of my products.
• For Customs, this part will be labeled as “Sporting Shotgun Accessories”: HST Code: 9305.20.00
• International Shipping: Items will be shipped with tracking.
• Once shipped, this item is non refundable, if it gets lost in the mail, it is the customers responsibility and cost.  Rx Arms Solutions is not liable for any lost shipments.

Backorder/Preorder Terms:

• • Backorders are payment in full.  If, for whatever reason, you need to cancel the backorder before it ships, I will need to take 5% off the total backorder amount to refund the amount.  This will cover charges my credit card processor charges me.  For example, if the order was for $100, I will keep $5 and return $95 to you, to cover my back end costs.
  • When ordering a backorder item with an item in stock, the shipment will be delayed until all items are in stock.

You may be interested in some of my other Benelli M4 and Tavor x95 / 7 Parts. Get more information on the Benelli M4.