Benelli M4 Picatinny Rail Mil Spec
Rx Arms Solutions Benelli M4 Picatinny Rail Mil Spec. Made from 6061-T6 Aluminum with Type III Hard Coat Annodize black.. The original picatinny rail on the Benelli M4 is not true Mil Spec due to the cutout down the middle of the rail, which can cause problems and potential damage with optics mounts. This is a replacement picatinny rail to provide a full mil spec solution for those that like to use optics mounts on their Benelli M4 picatinny rail. In addition, it provides compatibility with the Rx Arms Solutions Benelli M4 Handguard Compatible M-LOK® Heat Shield via the boss hole at the front of the picatinny rail. Made In Canada.
Benelli M4 Picatinny Rail Specs:
- Rx Arms Benelli M4 Picatinny Rail is specifically designed and tested for compatibility with the Benelli M4 and M1014.
- 100% true Mil Spec profile, with all sharp edges and snag points removed deburred and smoothed.
- Material: Rx Arms Benelli M4 Picatinny Rail is milled from 6061-T6 Aluminum
- Type III Hard Coat Annodize Black
- Weight: 35g
- Provides compatibility with the Rx Arms Solutions Benelli M4 Handguard Compatible M-LOK® Heat Shield.
- Uses the Original OEM receiver screws and washers are needed to mount this picatinny rail, or upgrade to the Rx Arms Benelli M4 Mounting Rail Screws.
- Lifetime warranty against manufacturer defects, like all of our Benelli M4 accessories and parts.
- Made in Canada.
- Refund and Returns policy can be viewed here.
Benelli M4 Picatinny Rail Installation:
- Recommended torque on receiver bolts are 15inlb (Benelli Recommends 16inlb, do NOT over tighten).
- Tools needed: Flat head screw driver, torque screwdriver.
USA Residents Info:
We ship this domestically from our USA location, no duties, no tariffs.
Other International Shipments (IMPORTANT):
- Other International customers are responsible for any customs tax/duties. This is not legal advice, do your own research and due diligence.
- International customers are solely responsible to comply with all of their local laws and regulations. Rx Arms Solutions is not liable for any legal compliance issues that may arise from the purchase of my products.
- For Customs, this part will be labeled as “Sporting Shotgun Accessories”: HST Code: 9305.20.00
- International Shipping: Items will be shipped with tracking.
- Once shipped, this item is non refundable, if it gets lost in the mail, it is the customers responsibility and cost. Rx Arms Solutions is not liable for any lost shipments.
Backorder/Preorder Terms:
-
- Backorders are payment in full. If, for whatever reason, you need to cancel the backorder before it ships, I will need to take 7% off the total backorder amount to refund the amount. This will cover charges my credit card processor charges me. For example, if the order was for $100, I will keep $5 and return $95 to you, to cover my back end costs.
- When ordering a backorder item with an item in stock, the shipment will be delayed until all items are in stock.
You may be interested in some of my other Benelli M4 and Tavor x95 / 7 Parts. Get more information on the Benelli M4. Benelli® is a registered trademark of Benelli Armi SpA. Rx Arms Solutions Ltd. is not affiliated with or endorsed by Benelli or its subsidiaries.
Roman A. (verified owner) –
LOKS SOOO CLEAN!!!
Luke (verified owner) –
Jsin Marquez (verified owner) –
MARIO L. (verified owner) –
It fit perfectly and arrived fast.
Anonymous (verified owner) –
Jason L. (verified owner) –
solid platform foe my new optic
Issac Clark (verified owner) –
Anonymous (verified owner) –
Jared S. (verified owner) –
Works as intended
vincenzo (verified owner) –
Fits great
Anonymous (verified owner) –
Anonymous (verified owner) –
Nice
Anonymous (verified owner) –
Didn’t fit my turkenelli, as the receiver holes were different, seemed fine though won’t let me review only the other items so 4 stars quality seems ok but didn’t come with screws so minus a star
Robb Hutzal (store manager) –
Thanks for the review, OEM screws are to be used with this product.
Matthew Clarke (verified owner) –
Tommy (verified owner) –
aaron b. (verified owner) –
Well made.
Michael Dozier (verified owner) –
Mitchell LeMuiex (verified owner) –
Its 100% a picatinny rail 🙂
Anthony (verified owner) –
Colin O. (verified owner) –
Ceephus (verified owner) –
Beautifully machined and more functional than OEM.
Adam R. (verified owner) –
I understand the necessity of this piece to interlock with the handguard. Its a quality rail.
Chris Young (verified owner) –
Great fit!
Kevin (verified owner) –
Rx arms picatinny rail should fit the heat shield a little more snug
Robb Hutzal (store manager) –
Hey Kevin, a small piece of thin tape on the top of the boss can snug the heat shield down more if desired.
Matthew H. (verified owner) –
Works as advertised, essential to mount the heat shield MLOK rail. Easy install, instructions clear. Do as the man says and torque it properly.
James Finnan (verified owner) –
Ryan L. (verified owner) –
Works great with the heat shield!
Marc Cheek (verified owner) –
Solid accessory.
Frederic D. (verified owner) –
It’s a pic rail, not much to say.
John Blanck (verified owner) –
This Pic rail section was needed to mount my Holosun 510 and interface with the RX Arms Heat Shield. The installation was Simple, using the original mounting hardware my Benelli came with. As well, the RX Arms bolt release tab is a Must Have as it makes that bolt release so much easier than stock.
Jose Velez (verified owner) –
Extremely please with delivery. Very easy to install, and aesthetically looks amazing
Kevin (verified owner) –
Just got my offset M-LOK match saver, heat shield, and pic rail. They fit perfectly and and really spruce up the M4.
Vanvenito Navillas (verified owner) –
Definitely worked well with the heat shield , very item for the upgrade.
Stephen Taylor (verified owner) –
Heatshield fit in perfectly, no issues whatsoever!