Benelli M4 Storage Compartment for Collapsible Stock

(14 customer reviews)


Shipping to USA, Canada, Other International

Availability: In stock

Frequently Bought Together:
This item: Benelli M4 Storage Compartment for Collapsible Stock

Availability: In stock


Benelli M4 Storage Compartment For Collapsible Stock

Rx Arms Solutions Benelli M4 Storage Compartment for the Benelli M4 Collapsible Stock, also fully compatible with the Benelli M1014.  The first of its kind, offers shotgunners the ability to store small items on the go.  The storage compartment uses the existing screws from the Benelli M4 Collapsible Stock Comb to hold it firmly in place, no modifications to your OEM equipment are needed at all to install this item.  Made In Canada.

Benelli M4 Storage Compartment Capacity And Use:

Capacity to store a single CR123A or AA battery, along with other smaller items such a torx or hex tool.  Plus many other countless combinations of small gun items for your needs.  It can be a tight fit to load and unload items into the compartment, but testing has been done on items as long as a AA battery.  Features small drainage slots on the bottom of the compartment to drain out water should the gun get submersed in water.

To open the storage compartment, simply use a Benelli M4 Charging Handle and pop open the lid to access your items.

Benelli M4 Storage Compartment Specs:

  • Rx Arms Benelli M4 Storage Compartment is specifically designed and tested for the Benelli M4 and M1014 Legacy Collapsible Stock.  Not compatible with the M4A1/M4 T-Pro buttstock.
  • Material: Rx Arms Benelli M4 Storage Compartment is made from Nylon PA12.
  • Weight: 19g
  • Installs directly under the OEM comb, and uses the screws for the comb to secure the compartment firmly in place.
  • Lifetime warranty, like all of our accessories and parts.
  • Made in Canada.
  • Refund and Returns policy can be viewed here.

Benelli M4 Storage Compartment Installation:

USA Residents Information (IMPORTANT):

We have been shipping our products to USA customers for years without issue, but below are some items to note:

    • USA customer are responsible for any customs tax/duties, however anything under $800 USD is rarely taxed according to the research I have conducted. This is not legal advice, do your own due diligence.
    • According to the ATF, a Form 6 exemption is granted for sporting shotgun parts/accessories as stated on point 6. “Sporting shotgun parts other than firearm frames or receivers or barrels.” [are exempt from Form 6].   The Benelli M4 is a shotgun that is legally imported into the USA as “generally recognized as particularly suitable for or readily adaptable to sporting purposes.” (further details on this can be read in the ATF National Firearms Act Handbook).  As such, it is a sporting shotgun when it is imported into the USA, and according to the Form 6 exemption list, does not need a form 6 when importing parts and accessories..  This is not legal advice, please do your own research and due diligence.
    • Customs Label “Sporting Shotgun Accessories” HST Code 9305.20.80 (Found in Chapter 93)
    • USA Shipping: This item will be shipped with tracking.

Backorder/Preorder Terms:

    • Backorders are payment in full.  If, for whatever reason, you need to cancel the backorder before it ships, I will need to take 5% off the total backorder amount to refund the amount.  This will cover charges my credit card processor charges me.  For example, if the order was for $100, I will keep $5 and return $95 to you, to cover my back end costs.
    • When ordering a backorder item with an item in stock, the shipment will be delayed until all items are in stock.

You may enjoy my other Benelli M4 and Tavor X95 / 7 Parts and Accessories. Get more information on the Benelli M4 Shotgun.  The Benelli M4 is a versatile shotgun that is great to carry when hiking, hunting, or getting outdoors in the woods.  

14 reviews for Benelli M4 Storage Compartment for Collapsible Stock

  1. Anthony M. (verified owner)

    Perfect storage spot for some spare CR2032 optics batteries and a couple of hex tools for my M4 mounted red dot. Bravo Zulu!

  2. Chris S. (verified owner)

    Cool little add on, good place to store batteries.

  3. Graham R. (verified owner)

    Good for putting a couple batteries for my rmr into

  4. James K. (verified owner)

    Big enough for a spare charging handle and a tiny bottle of CLP

    Image #1 from James K.
  5. Ceephus (verified owner)

    Great product, gives me a place to store a small tax stamp copy finally, plus a spare optic battery and a tube of lube.

  6. Jean-Claude EL-Chidiac (verified owner)

  7. Mathew (verified owner)

    Neat little compartment for batteries and such.

  8. KZ

    Well designed product. Feel safe that I can carry wrench and screw drives along with my benelli in case screws get loose (front sight and mount base)

    Image #1 from KZ
  9. James Myshak (verified owner)

  10. Herb (verified owner)

    Very easy to install and works very well.
    Something to keep in mind that with thicker sling, it might get in the way of the door opening. I just attached my sling differently.

    Image #1 from Herb
  11. Darren D. (verified owner)

    Works great

  12. Anonymous (verified owner)

    good construction, it’s 3D printed so the finish is a little odd, I wish it were some kind of quality polymer but i understand that this is a small company which primarily focuses on steel and titanium products rather than plastic. the inner compartment is big enough to hold some small tools (or around 15 Haribo gummy bears) and is is pried open with the charging handle. overall it’s a product that doesn’t hurt to buy because you’re making use of dead space on the weapon that never would have had a purpose if you didn’t buy it. neat little upgrade.

    • Robb Hutzal (store manager)

      Thanks for the review! Due to the geometry needed on some features, inject molding would be impossible to achieve. MJF printing allows me to implement these aspects to make a functional product.

  13. MARC (verified owner)

    This absolutely a well thought out piece of kit for the Benelli M4. Easy install and fast shipping even though from Canada. It’s small but, holds a battery or small parts and is secure. I also picked up the Stock Sling attachment and installed at same time which is best. Both are awesome additions.

  14. William (verified owner)

    Nice little device, great for battery or small lube tube. Attached pretty well

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart
Rx Arms Solutions - Benelli | Beretta | IWI Tavor