Benelli M4 Best Upgrades Accessories That Matter

Benelli M4 / M1014 Tactical Build: The Best Benelli M4 Upgrades & Accessories

If you’ve spent any time online on shotgun forums or on reddit, you’ll know that there are some common questions that typically surface, some of which being:  “What are the best Benelli M4 upgrades? What Benelli M4 accessories should I buy first?”  I would have to say that every user has different priorities, and may prefer different upgrade paths.  Also, some upgrades might be useful for the civilian M1014, but not for the new EXT model.  After years of developing, testing, and making the parts that end up on these guns, I want to break down one of the builds that I use on my Benelli M4.  I’ll briefly discuss each mod, what problem it solves, and why I believe these are the best Benelli M4 upgrades and accessories to implement on your tactical build.  Lets get into it!

Starting With Capacity

Many OE Benelli M4 models ship with a restricted 5-round magazine tube with a false extension.  A popular model that includes a collapsible stock from the factory (with a 1 position fixed recoil tube) is the M1014 civilian model #11701.  This can be a popular model because it includes the hard to get collapsible stock assembly (pistol grip and buttstock), and has a USA flag engraved on it, is is generally bad ass with the OG M1014 vibes.  So the first thing users usually upgrade on their M4/M1014 before anything else, is typically getting rid of the false extension, and replacing it with a +2 Magazine extension (or +1 for myself and my fellow Canadians). A +2 magazine extension brings the gun to 7+1 rounds of 2.75″ 12-gauge shell. It installs in minutes, and is by far the easiest performance upgrade on the platform. I have found that if customers only do one thing to mod their M4, this is typically it.

If you’re wondering why your M4 won’t hold 7 rounds even after adding the extension, I’ve covered that in detail on a separate blog post.  In summary; shell crimp type, load type, and unfired shell length vary significantly between manufacturers, and that variance is the reason you may be having issues with that.

for Benelli M4 EXT model owners, your firearm already comes with a +2 magazine extension, so you can skip past this upgrade.

Fixing the Length of Pull, One Of The Best Benelli M4 Upgrades

The factory OEM 3-position recoil tube (or 1 position tube on the M1014) is one of the most limiting aspects of the M4 collapsible stock setup. Position 1 is typically useful only for storage. Position 3 at 14 1/4″ is too long for most average height shooters. That leaves you with one real option at roughly 12 3/8″.  As mentioned above, if you own a civilian M1014, it’s worse: the tube is fixed at full extension with zero adjustability.

Benelli M4 M1014 Ultimate Tactical Upgrades 6 position recoil tube

Our 6 position recoil tube solves this completely, giving you six positions from 9 3/8″ to 14 1/4″ in roughly 1/2″ increments. If you are running an optic on the picatinny, or using a cheek riser, or body armour, are if you are shorter in height, more adjustability makes a huge difference.  That half inch between positions is the difference between a stock that fits and one that almost fits. I personally run position 4 at 13 1/4″ as my primary setting.  You can check out our technical breakdown on our 6 Position Recoil Tube if you are interested in the fine details.

Benelli EXT Model: the EXT comes with a European style collapsible stock (not to be confused with the American style OG M1014 collapsible stock), and a 5 position recoil tube.  The 6 position tube we produce is not compatible with the EXT style collapsible stock.

Controls: Charging Handle and Bolt Release

The factory Benelli M4 controls are notoriously small. The charging handle is narrow and difficult to grip under stress or with gloves. The bolt release button is a small, recessed round button that requires precise finger positioning to drop the bolt, not quite ideal for a high stress situation.

Benelli M4 M1014 Ultimate Tactical Upgrades Charge Handle Bolt Release

Our Titanium charging handle gives you a significantly larger, knurled surface to grab. It’s machined from Grade 5 6AL-4V titanium, which means it’s lighter than steel and as a result won’t snap off from the whip of the bolt cycling. The tang is made from >42RC Stainless steel, to engage with the bolt detent properly.  This design is also available in our 7075-T6 handle variant.

Our Bolt Release Tab simply slips onto the hand-guard retaining band under the polymer hand guard, very easy and quick installation. It allows you to get 2 or 3 fingers on the bolt release for a quick and easy manipulation.

Benelli M4 EXT: This model comes with a bit larger of a charge handle, and a larger circular bolt release.  Our charge handle is compatible with the EXT, but we do not recommend using the Bolt Release Tab with the EXT bolt release button.

Receiver Mounted Ammo: QD Side Saddle Shell Carrier vs. Fixed Side Saddle vs Shotgun Shell Card

Fixed side saddles (for example the Mesa Tactical style mounts that bolt to the receiver) are popular and proven. The limitation is permanence. Once they’re on, they’re on. They add width, they stay on during storage, making gun safe tetris more difficult.  Additionally, they can stress the receiver threaded holes with a cantilever load the original firearm was not designed for.  Shot Shell velcro cards are convenient, and cheap.  But they can break down, lose elasticity, and the adhesive used for the receiver loop is susceptible to degradation from oils, solvents, and temperature extremes.  I won’t go into extreme detail here, but you can read more on this topic @ Why a QD Side Saddle Hybrid Makes Sense.

Benelli M4 M1014 Tactical Build Upgrades QD Side Saddle Shell Carrier

Our Multi Platform QD Side Saddle Shell Carrier solves the detachability problem. It mounts securely to the receiver with a 7075-T6 aluminum mounting plate using 3M VHB adhesive based attachment (used in Aerospace and Transportation sector to replace rivets and welds), and the shell carrier body itself quick detaches from that mounting plate when desired. You can remove the bulk for low-profile storage, swap carriers between platforms, run different carriers for different loads (we offer black, FDE and orange).  They are also compatible with most textile manufactured AR15 mag pouches, giving ammo storage on a belt or plate carrier more options.

For this build, I’m running the QD Side Saddle on the side of the receiver loaded with some buck shot.

Heat Management and Accessory Mounting

One of the most common issues I see online is how to mount a weapon light on the M4.  I’d like to take it a step further and talk about utilizing a remote switch, while reducing barrel shadow, and retaining tool less takedown.  On another point, QD sling mounts are also a common source of questions, how to ideally mount a sling to the M4 using a QD system (I cover this below).  And of course not burning your hands while reloading.

Benelli M4 M1014 Tactical build Upgrades M LOK Heat Shield Accessory Mounting

Our M-LOK Heat Shield addresses all these common issues and makes it one of the best overall Benelli M4 upgrades. It provides dedicated M-LOK slots along the heat shield for mounting lights, pressure switches, QD sling cups, our Offset MLOK Match Saver, and other accessories without adding the bulk of a full rail, while retaining the OEM Ergos of the OG M1014 polymer hand guard.   When violin reloading, it protects your hands from the hot barrel. Tool-less take down preserved.

Benelli M4 M1014 Tactical Build Upgrades Unity Tactical Hot Button

On this build I’m running a SureFire M340DFT-Pro Turbo Mini Scout Light Pro.  Running the wire on the underside of the heat shield to reduce snag points to a Unity Tactical Hot Button mounted just forward of the hand guard giving clean thumb activation.  I believe these Unity Tactical Hot Buttons are now discontinued, but don’t quote me on it.

Benelli M4 M1014 Tactical Build Upgrades Surefire M340DFT-PRO Turbo Mini Scout Light Pro

Optics: Lower Integrated Mounting Is Usually Best

Typical shotgun combs sit low and at an angle, relative to the receiver. If you mount a red dot on a tall Picatinny the way you would on an AR, you typically end up with a chin weld instead of a cheek weld. Some may prefer this, considering the new movement of using super high mounts for red dots on AR15 platforms.  Picatinny mounting also gives the user to swap out different optics more quickly with QD optic mounts.

Benelli M4 M1014 Tactical Build Upgrades Aimpoint ACRO Optic Mount

However, for me, the more comfortable solution is an integrated receiver optic mount that brings the dot down as close to bore as possible, giving the me a good cheek weld.  On this build I’m running an Aimpoint Acro P2 on our ACRO Optic Mount. Paired with our half-moon rear sight, it gives you a clean unobstructed sight picture, and usable backup iron sights.  I’m also using our Torx Mounting Rail Screws on this ACRO optic mount, which has pre applied Nylok Patches on them.  We also offer Aimpoint MICRO, and Trijicon RMR footprint mounts, as well as a full Mil Spec Picatinny.

Sling Setup

Sling integration on the M4 can be tricky if you want to utilize a QD sling setup.  The platform has a clean solution when using our heat shield: our QD sling mount on the collapsible stock creates a solid rear anchor point, and a BCM MCMR-SM QD Sling Mount (MLOK) cup on the MLOK heat shield near the front of the firearm. 

Benelli M4 M1014 Tactical Build Upgrades QD Sling Mount

I am using a Magpul MS1 with QD swivels on this build. I like the Two point sling setup, I like to mount my sling further forward, with no interference around the loading port or shell carrier, or weapon light remote switch.

Benelli M4 M1014 Tactical Build Upgrades Sling

The Full Parts List

Browse our Collection of Benelli M4 Accessories 

FAQ

What should I upgrade first on a Benelli M4?

Capacity first, always. Our magazine extension is the easiest install on the platform and the highest immediate impact on the firearm. After that, the 6-position recoil tube if you’re running the collapsible stock. Everything else is up to user preference.

What is the best red dot for the Benelli M4?

The Aimpoint Acro P-2 is my choice on this build. Enclosed emitter, bombproof durability, and it works well on a direct low mount without adding height. I also am very much fan of the Trijicon RMR which I often swap out on my builds.  Of course the Aimopoint T2 needs no introduction and is the most battle worthy red dot you can mount with an integrated mounting solution but is a bit heavier and larger.

Whats the best way to mount a light on the Benelli M4?

The RX Arms M-LOK heat shield is the go to solution. It gives you dedicated mounting slots for a light and pressure switch, and a plethory of aftermarket accessories.  It preserves tool-less take down which was a key aspect of our design.

What is the best side saddle for the Benelli M4?

Depends on whether you want permanent or detachable. Fixed receiver-mounted saddles are proven and solid but have their disadvantages. If you want the option to quickly detach the carrier for low-profile storage or swap new reloads onto your firearm, our QD Side Saddle Shell Carrier is the answer.

Does the 6-position recoil tube work on the M4 EXT?

No. The EXT uses a different collapsible stock (Benelli 70132) that is not compatible with our tube. Our tube is for the legacy M4 and M1014 with the OEM collapsible stock (Benelli 70085) only.

How do I attach a sling to a Benelli M4?

A QD sling mount at the collapsible stock for the rear anchor, and a forward QD point on the heat shield. Magpul MS1 with QD swivels is a clean, practical setup.

Shopping Cart
Join Waitlist: We will let you know you when this product is back in stock. Please leave a valid email address below.